Job-site calculators

Tools

The numbers a tech needs poolside — no login, fast on a phone. Outputs are indicative; read the note under each tool.

Pool volume

Litres from shape and dimensions — the number every dose starts from.

Volume—

Freeform pools use a 0.89 shape factor. Round up when dosing sanitiser down.

Salinity

Salt to add to reach chlorinator operating range.

Salt to add—

Check the chlorinator's rated range — targets vary by model. 1 ppm = 1 mg/L.

Saturation index (LSI)

Is the water balanced, corrosive or scale-forming?

Index—

Carbonate alkalinity = TA − CYA/3. TDS constant per the ANSI/APSP-11 table. Balanced band ±0.3. About scale and the LSI

Heat pump sizing

Which Sensaheat suits this pool, how long it takes to bring up, and what it costs to run.

A full month-by-month heat balance for WA conditions — Perth, the South West, Mid West, Great Southern, Goldfields and Pilbara. Set the pool, the blanket and the run time, and it names the unit.

  • Recommended Sensaheat model across the TDX, PiX and ES series
  • Heat-up time and running cost, month by month
  • What a blanket is worth on that pool, in dollars and in kW
Open the calculator

Energy saving

Annual running-cost difference when swapping the pump.

Saving per year—

Assumes the same run hours year-round. Variable-speed pumps often allow longer, slower runs — savings shown are conservative.

Field guides

Short diagnostic checklists for common call-backs: green and cloudy water, salt chlorinators, mineral pools, scale, stains, stabiliser, black spot, pumps and filters. See all field guides or water testing and LaMotte kits.

Need product to act on a result? Salt, balancers and sanitiser are on the next run — call your rep.

Browse products